Characterisation and modelling of water wicking and evaporation in capillary porous media for passive and energy-efficient applications

Passive devices based on water wicking and evaporation offer a robust, cheap, off-grid, energy-efficient and sustainable alternative to a wide variety of applications, ranging from personal thermal management to water treatment, from filtration to sustainable cooling technologies. Among the available, highly-engineered materials currently employed for these purposes, polyethylene-based fabrics offer a promising alternative thanks to the precise control of their fabrication parameters, their light-weight, thermal and mechanical properties, chemical stability and sustainability. As such, both woven and non-woven fabrics are commonly used in capillary-fed devices, and their wicking properties have been extensively modelled relying on analytical equations. However, a comprehensive and flexible modelling framework able to investigate and couple all the heat and mass transfer phenomena regulating the water dynamics in complex 2-D and 3-D porous components is currently missing. This work presents a comprehensive theoretical model aimed to investigate the wetting and drying performance of hydrophilic porous materials depending on their structural properties and on the external environmental conditions. The model is first validated against experiments (R2=0.99 for the wicking model; errors lower than 14% and 1% for the evaporation and radiative models, respectively), then employed in three application cases: the characterisation of the capillary properties of a novel textile; the assessment of the thermal performance of a known material for personal thermal management when used in different conditions; the model-assisted design of a porous hydrophilic component of passive devices for water desalination. The obtained results showed a deep interconnection between the different heat and mass transfer mechanisms, the porous structure and external working conditions. Thus, modelling their non-linear behaviour plays a crucial role in determining the optimal material characteristics to maximise the performance of porous materials for passive devices for the energy and water sector

Pierce the ear and stab the spleen

Splenic abscess is a rare but extremely dangerous condition generally spreading from a local, or systemic, focus of infection. We present the case of a young immunocompetent female admitted with sepsis and multiple splenic abscesses. The patient had a recent left ear piercing on the tragus complicated by an ear infection. The presence of a solitary parotid abscess, the absence of other infectious foci on computed tomography scan, the negativity of blood cultures and the absence of endocarditis vegetations led us to think that the most likely culprit was a hematogenous dissemination from the left tragus. The patient was successfully treated with intravenous antibiotics. There had been no need of splenectomy or any other procedure. This rather unique case underscores that splenic abscess should be suspected when a long-lasting fever and pain in the left hypochondrium are present, even when an apparently innocuous invasive procedure, such as a body piercing, is performed

Sustainable polyethylene fabrics with engineered moisture transport for passive cooling

Polyethylene (PE) has emerged recently as a promising polymer for incorporation in wearable textiles owing to its high infrared transparency and tuneable visible opacity, which allows the human body to cool via thermal radiation, potentially saving energy on building refrigeration. Here, we show that single-material PE fabrics may offer a sustainable, high-performance alternative to conventional textiles, extending beyond radiative cooling. PE fabrics exhibit ultra-light weight, low material cost and recyclability. Industrial materials sustainability (Higg) index calculations predict a low environmental footprint for PE fabrics in the production phase. We engineered PE fibres, yarns and fabrics to achieve efficient water wicking and fast-drying performance which, combined with their excellent stain resistance, offer promise in reducing energy and water consumption as well as the environmental footprint of PE textiles in their use phase. Unlike previously explored nanoporous PE materials, the high-performance PE fabrics in this study are made from fibres melt spun and woven on standard equipment used by the textile industry worldwide and do not require any chemical coatings. We further demonstrate that these PE fibres can be dry coloured during fabrication, resulting in dramatic water savings without masking the PE molecular fingerprints scanned during the automated recycling process

Sustainable polyethylene fabrics with engineered moisture transport for passive cooling

Polyethylene (PE) has emerged recently as a promising polymer for incorporation in wearable textiles owing to its high infrared transparency and tuneable visible opacity, which allows the human body to cool via thermal radiation, potentially saving energy on building refrigeration. Here, we show that single-material PE fabrics may offer a sustainable, high-performance alternative to conventional textiles, extending beyond radiative cooling. PE fabrics exhibit ultra-light weight, low material cost and recyclability. Industrial materials sustainability (Higg) index calculations predict a low environmental footprint for PE fabrics in the production phase. We engineered PE fibres, yarns and fabrics to achieve efficient water wicking and fast-drying performance which, combined with their excellent stain resistance, offer promise in reducing energy and water consumption as well as the environmental footprint of PE textiles in their use phase. Unlike previously explored nanoporous PE materials, the high-performance PE fabrics in this study are made from fibres melt spun and woven on standard equipment used by the textile industry worldwide and do not require any chemical coatings. We further demonstrate that these PE fibres can be dry coloured during fabrication, resulting in dramatic water savings without masking the PE molecular fingerprints scanned during the automated recycling process.The textile industry is one of the largest polluters. Here the authors show that polyethylene is a sustainable alternative textile with water wicking and fast-drying performance. The fabrication of polyethylene fabrics is compatible with standard equipment and could be dry-coloured, further reducing water consumption

Voronoi Tessellation Captures Very Early Clustering of Single Primary Cells as Induced by Interactions in Nascent Biofilms

Biofilms dominate microbial life in numerous aquatic ecosystems, and in engineered and medical systems, as well. The formation of biofilms is initiated by single primary cells colonizing surfaces from the bulk liquid. The next steps from primary cells towards the first cell clusters as the initial step of biofilm formation remain relatively poorly studied. Clonal growth and random migration of primary cells are traditionally considered as the dominant processes leading to organized microcolonies in laboratory grown monocultures. Using Voronoi tessellation, we show that the spatial distribution of primary cells colonizing initially sterile surfaces from natural streamwater community deviates from uniform randomness already during the very early colonisation. The deviation from uniform randomness increased with colonisation — despite the absence of cell reproduction — and was even more pronounced when the flow of water above biofilms was multidirectional and shear stress elevated. We propose a simple mechanistic model that captures interactions, such as cell-to-cell signalling or chemical surface conditioning, to simulate the observed distribution patterns. Model predictions match empirical observations reasonably well, highlighting the role of biotic interactions even already during very early biofilm formation despite few and distant cells. The transition from single primary cells to clustering accelerated by biotic interactions rather than by reproduction may be particularly advantageous in harsh environments — the rule rather than the exception outside the laboratory

YY1 overexpression is associated with poor prognosis and metastasis-free survival in patients suffering osteosarcoma

<p>Abstract</p> <p>Background</p> <p>The polycomb transcription factor Yin Yang 1 (YY1) overexpression can be causally implicated in experimental tumor growth and metastasization. To date, there is no clinical evidence of YY1 involvement in outcome of patients with osteosarcoma. Prognosis of osteosarcoma is still severe and only few patients survive beyond five years. We performed a prospective immunohistochemistry analysis to correlate YY1 immunostaining with metastatic development and survival in a selected homogeneous group of patients with osteosarcoma.</p> <p>Methods</p> <p>We studied 41 patients suffering from osteosarcoma (stage II-IVa). Multivariate analysis was performed using Cox proportional hazard regression to evaluate the correlation between YY1 expression and both metastasis development and mortality.</p> <p>Results</p> <p>YY1 protein is not usually present in normal bone; in contrast, a high number of patients (61%) showed a high score of YY1 positive cells (51-100%) and 39% had a low score (10-50% positive cells). No statistical difference was found in histology, anatomic sites, or response to chemotherapy between the two degrees of YY1 expression. Cox regression analysis demonstrated that the highest score of YY1 expression was predictive of both low metastasis-free survival (HR = 4.690, 95%CI = 1.079-20.396; p = 0.039) and poor overall survival (HR = 8.353, 95%CI = 1.863-37.451 p = 0.006) regardless of the effects of covariates such as age, gender, histology and chemonecrosis.</p> <p>Conclusion</p> <p>Overexpression of YY1 in primary site of osteosarcoma is associated with the occurrence of metastasis and poor clinical outcome.</p

Bacteria clustering by polymers induces the expression of quorum sense controlled phenotypes

Bacteria deploy a range of chemistries to regulate their behaviour and respond to their environment. Quorum sensing is one mean by which bacteria use chemical reactions to modulate pre-infection behaviour such as surface attachment. Polymers that can interfere with bacterial adhesion or the chemical reactions used for quorum sensing are thus a potential means to control bacterial population responses. Here we report how polymeric "bacteria sequestrants", designed to bind to bacteria through electrostatic interactions and thus inhibit bacterial adhesion to surfaces, induce the expression of quorum sensing controlled phenotypes as a consequence of cell clustering. A combination of polymer and analytical chemistry, biological assays and computational modelling has been used to characterise the feedback between bacteria clustering and quorum sensing signaling. We have also derived design principles and chemical strategies for controlling bacterial behaviour at the population leve

A short-term in vivo model for giant cell tumor of bone

<p>Abstract</p> <p>Background</p> <p>Because of the lack of suitable <it>in vivo </it>models of giant cell tumor of bone (GCT), little is known about its underlying fundamental pro-tumoral events, such as tumor growth, invasion, angiogenesis and metastasis. There is no existing cell line that contains all the cell and tissue tumor components of GCT and thus <it>in vitro </it>testing of anti-tumor agents on GCT is not possible. In this study we have characterized a new method of growing a GCT tumor on a chick chorio-allantoic membrane (CAM) for this purpose.</p> <p>Methods</p> <p>Fresh tumor tissue was obtained from 10 patients and homogenized. The suspension was grafted onto the CAM at day 10 of development. The growth process was monitored by daily observation and photo documentation using <it>in vivo </it>biomicroscopy. After 6 days, samples were fixed and further analyzed using standard histology (hematoxylin and eosin stains), Ki67 staining and fluorescence <it>in situ </it>hybridization (FISH).</p> <p>Results</p> <p>The suspension of all 10 patients formed solid tumors when grafted on the CAM. <it>In vivo </it>microscopy and standard histology revealed a rich vascularization of the tumors. The tumors were composed of the typical components of GCT, including (CD51+/CD68+) multinucleated giant cells whichwere generally less numerous and contained fewer nuclei than in the original tumors. Ki67 staining revealed a very low proliferation rate. The FISH demonstrated that the tumors were composed of human cells interspersed with chick-derived capillaries.</p> <p>Conclusions</p> <p>A reliable protocol for grafting of human GCT onto the chick chorio-allantoic membrane is established. This is the first <it>in vivo </it>model for giant cell tumors of bone which opens new perspectives to study this disease and to test new therapeutical agents.</p